FlatCore Hybrid-Unterstützungsmatratze für Tesla Model Y - Solo Edition

Entwickelt für alle, die schon einmal auf einem schrägen Sitzplatz halb eingeschlafen sind.

Verkaufspreis$529.00
1 Matratze ≈ 2–3 Hotelnächte in der Nähe eines Nationalparks

Ein Schlafsystem für das Model Y in Einzelbreite ebnet eine Seite des Laderaums und lässt die andere Seite für Ausrüstung frei.

Hergestellt für Model Y
Einzelschlafbreite Schlafoberfläche
Lässt den Laderaum offen
Ebenen der Rückseite
3 Jahre Garantie
60-tägige Schlafprobe

Is FlatCore Right for Your Outback?

Made for Outback owners who want a flatter bed without a platform

Folding the seats creates plenty of length, but not a truly finished bed. FlatCore levels the uneven cargo area, bridges the space behind the front seats, and preserves more headroom than a raised platform.

When the Folded Floor Still Isn’t Flat

“The mattress levels the floor and sleep is great.”

— Outback owner, r/Subaru_Outback

When the Seat Gap Cuts Into Your Sleep Space

“I’m looking for something to fill the seat gap so we can have the full amount of room to stretch out.”

— 2017 Outback owner, r/Subaru_Outback

When Headroom Matters More Than Storage

“I like having headroom, so I decided against a platform with drawers underneath me while sleeping.”

— Outback owner, r/Subaru_Outback

Core Design Details

Key Features

Echte Unterstützung, genau für eine Person.

Luft gibt der Struktur Halt. Schaumstoff macht die Landung weicher. Zusammen ergeben sie eine Schlafunterlage, die sich stabiler anfühlt als eine einfache Luftmatratze und unterstützender als weicher Camping-Schaumstoff ist. Entwickelt, damit eine Person wirklich schlafen kann und nicht nur die Nacht übersteht.

Keine separate Pumpe, die man nach Einbruch der Dunkelheit suchen muss.

Die Pumpe ist in die Matratze eingebaut, sodass die Einrichtung einfach bleibt, wenn Sie spät ankommen. Innerhalb einer Minute aufpumpen, nach Gefühl anpassen und wieder zusammenpacken, wenn die Straße wieder für Sie bereit ist.

Leise auf der Haut. Robust genug für die Straße.

Die Oberfläche fühlt sich eher wie technisches Outdoor-Equipment an als wie eine aufblasbare Luftmatratze aus Plastik. Sie ist glatt, geräuscharm und angenehm im geschlossenen Innenraum, egal ob Sie in Funktionsunterwäsche, einem Schlafsack oder zusammen mit Ihrem Hund schlafen.

Eine Seite zum Schlafen. Eine Seite für alles andere.

Das Solo-Layout bietet dir einen echten Schlafplatz, ohne die gesamte Kabine einzunehmen. Lass Platz für Ausrüstung, eine Kühlbox, einen Hund oder einen Sitz in der zweiten Reihe. Bei Alleinfahrten zählt genau dieser zusätzliche halbe Platz im Auto.

Soft-Touch TPU Surface

Unlike the slick, plastic feel common with PVC air mattresses, FlatCore uses TPU-laminated fabric for a softer, more mattress-like surface with less noticeable odor.

Ultra-Packable Design

When the trip is over, the built-in pump compresses FlatCore in approximately 81 seconds. It rolls into its 28.3-by-15.7-inch carry bag, leaving the Outback ready for passengers, groceries, and everyday cargo.

Additional Benefits

Built-In Snaps Keep It Rolled

Side snap tabs hold the compressed mattress together while you place it in the carry bag, keeping pack-down controlled instead of letting the roll spring open.

Full-Width Comfort for Two

The 53.1-inch-wide surface creates a shared sleeping space for two adults and supports up to 661 pounds combined. Cozy enough for the Outback, supportive enough for a full night outside.

A Better Place to Recover Between Miles

Stretch out after a long drive, recover at the trailhead, or settle in before an early start. FlatCore turns the parked Outback into a comfortable place to slow down and recharge before the next part of the trip.

Size On

A dark gray cylindrical duffel bag with top handles and the white 'Havnby' logo printed on the front, shown against a plain white background.

VERPACKTE GRÖSSE

28.3" × 13.4"

FlatCore_CloudCore_Battery

AUFBLASZEIT

50 Sekunden

Specifications

Fit
Subaru Outback
Layout
Full-Width
Mattress size
74.0" × 53.1" × 5.5" / 1880 × 1350 × 140 mm
Packed size
28.3" × 15.7"
Inflation time
73 seconds
Compression time
81 seconds

Komfort sollte nicht länger dauern einzurichten als die Fahrt selbst.

Tent - 35 min average setup More time to pack wet
Traditional camp setups add steps before you can rest.
FlatCore keeps sleep simple: unroll the mattress, settle into soft foam support, and get comfortable faster.
Camper shell - permanent mod Resale value drops
Permanent mods are hard to undo.
FlatCore keeps your vehicle flexible while adding a foam-top layer that feels softer and more stable than sleeping on air alone.
A modular wooden platform bed frame with light natural wood slats and a dark gray metal frame, shown on a plain white background.
Roof top tent - $1,500 and up Plus rack and install
Roof top tents add cost, hardware, and permanent bulk.
FlatCore gives you a cushioned foam sleep surface without turning your vehicle into a build project.
Luftmatratze FlatCore Matratze
Setup time
10-15 min with pump
Unroll, under 120 sec
Soft & supportive comfort
Holds shape overnight
Slow leaks are common
Built-in pump
Insulation from cold floor

Was echte Besitzer sagen

Jessica M., Mutter von zwei Kindern · Austin, TX

Unverzichtbares für die Autoreise

„Perfekt für lange Autofahrten. Es bläst sich schnell auf, passt gut in meinen SUV und bietet den Kindern während der Pausen einen bequemen Platz zum Ausruhen.“

Ryan K., Wochenend-Camper · Denver, CO

Komfort, der die ganze Nacht anhält

„Überraschend bequem für eine Autoluftmatratze. Das Material fühlt sich robust an und sie blieb über Nacht problemlos aufgeblasen.“

Amanda L., häufige Roadtrip-Fahrerin · Portland, OR

Ideal zum Campen und Reisen

„Einfach aufzubauen, leicht zu verstauen und viel besser als zu versuchen, in einem normalen Autositz ein Nickerchen zu machen.“

FAQ